Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Capitol Hill Homeowners
A garage door that no longer closes squarely, a single panel that’s rusted through, or a door that’s simply outlived its opener is not a problem you can put off in a house with a car, a bike, a stroller, or anything else worth keeping dry and secure. Garage door installation in Capitol Hill replaces the whole system rather than patching one bad piece, and it starts with a free measure and a written price before anything is ordered. Our technicians have up to 8 years of experience, and we work across Raynor, LiftMaster, Chamberlain and Genie equipment so you’re not bounced to a manufacturer for a brand we don’t recognize. Call (855) 604-5978 and we’ll set up a time to measure. For installation and replacement, the work is measured, ordered and scheduled – not same-day.
What Our Garage Door Installation Service Includes
Every installation we handle is the full door system: panels, tracks, springs, rollers, hinges and the opener, matched to each other rather than bolted together from mismatched parts. We only do garage doors, which means the technician measuring your opening knows exactly which door sizes, weights and spring tensions the frame can carry.
New Door Installation
A full new door installation means removing the old door, tracks and hardware, checking the opening for square and rot, and fitting a fresh system sized to your floor-to-header measurement. You need it when the door is structurally failing, when panels can’t be sourced, or when the old door predates your current opener and the two no longer work well together. We measure the opening on site, walk you through door options in your budget, and order the door to fit the wall you actually have, not a stock size that almost works.

Single Car Door
A single car door usually measures around eight to nine feet wide, which makes it lighter and easier on the springs than its double-wide cousin. It’s the right choice when you’re replacing one side of a two-bay garage or when a wide opening is split into two doors for tighter parking. We fit single doors with the correct track radius and spring pair for the door’s weight, so the door lifts smoothly by hand and the opener isn’t straining against it.

Double Car Door
A double car door spans sixteen feet or more, which puts real load on the springs and the header above the opening. You need one when your garage was built for two cars but never had a properly sized door, or when a wide door has begun to sag in the middle. We check the header and the framing before we quote, because a sixteen-foot door needs a sound structure to hang from, and we match the spring pair to that heavier door rather than reusing what was there.

Custom Garage Door
Custom work covers non-standard openings, arched headers, unusual widths and doors that need to match a specific facade. This comes up often in Capitol Hill rowhouses where the garage opening was cut decades ago and doesn’t fit any catalog size. We take careful measurements of the opening, the headroom and the side clearance, then spec a door that fits the space and the look of the block rather than forcing a stock door into a gap that isn’t square.
Steel Doors
Steel doors are the most common replacement choice for a reason: they’re strong, they hold paint well, and they handle the humidity swings of a Washington summer without warping. You want steel when you need durability and low upkeep in a door that sees daily use. We fit steel doors with insulated or non-insulated panels depending on whether the garage shares a wall with living space, and we set the tracks so the door seals against the frame.
Wood Doors
Wood doors bring warmth and suit older Capitol Hill facades that a flat steel panel would look wrong on. They need a door that balances well and a spring set tensioned for real wood weight, which is heavier than steel of the same size. We hang wood doors with hardware sized to the load and talk through finish and upkeep so you know what the door needs over the years, not just on installation day.
If you’re not sure yet whether you need a full installation or a targeted repair, our Garage Door Repair Capitol Hill page walks through what can be fixed versus what has to be replaced.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We work on your brand. Raynor doors are built like tanks, and we know their panel profiles and hardware well enough to match a replacement door to an existing Raynor track system when only the door needs to go. LiftMaster and Chamberlain openers come up on most of the jobs we quote, and because we fit doors and openers together, we set the opener’s travel limits and force settings to the new door’s actual weight rather than leaving the defaults in place. Genie openers show up on plenty of older Capitol Hill garages, and we’re comfortable working with both their legacy screw-drive units and the current smart-integrated models.
None of that is guesswork. We diagnose by how a specific brand is built and where it wears, so the door and opener we install for you work as one system. Whether you have Raynor, LiftMaster, Chamberlain, Genie or any other make, we can help – and we’ll tell you honestly if a repair makes more sense than a replacement.
Signs You Need Garage Door Installation Right Now
- The door is sagging or visibly bowed. A door that dips in the middle or sits crooked in the opening usually has a structural problem in the panels or the frame. Sagging gets worse with every cycle, and it puts extra strain on the opener and springs until something gives.
- Panels are cracked, rusted through, or rotted. Once a wood panel softens or a steel panel rusts through, moisture gets inside and the door loses strength. You can’t reliably patch a door that’s failing at the panel level, and it’s usually cheaper to replace than to keep chasing cracks.
- The door no longer closes evenly against the floor. Gaps at one corner mean the door or the tracks are out of alignment, and small animals and weather get in. If realignment doesn’t hold, the door or frame has moved enough that a new door is the honest answer.
- The opener is older than the door and struggling to lift it. Old openers weren’t built for a heavier modern door, and forcing one to lift a door it can’t handle burns out the motor. When the opener and door are both past their useful life, replacing them together saves you a second job later.
- Your door predates current safety features. Older doors without a working reversing mechanism are a real risk in a house with kids or pets. A new door paired with a LiftMaster or Chamberlain opener with modern safety reversing is a genuine safety upgrade, not just a cosmetic one.
Our Garage Door Installation Process – Step by Step
- 1
Free on-site measure. We measure the opening width, height, headroom and side clearance, and check the header and framing for soundness. This is where we catch the odd rowhouse opening that won’t take a stock door.
- 2
Written estimate and door selection. We walk through door styles, materials and opener options that fit your budget and your facade, then put the price in writing. You’ll know the number before anything is ordered, and the written estimate sets the final price.
- 3
Order and scheduling. Once you approve the estimate, we order the door sized to your opening. Because a door has to be built and delivered, installation is scheduled rather than same-day, and we confirm the date with you.
- 4
Removal and installation. We take out the old door, tracks and hardware, then set the new tracks, springs and door panels level and plumb. Springs are the highest-tension component in your garage system, and we handle them with the proper winding bars and technique – never by hand.
- 5
Opener setup and final balance check. We set the opener’s travel and force limits for the new door, test the safety reversing, and balance the door so it lifts easily by hand. Then we walk you through operation and upkeep before we leave.
A word on the dangerous part: torsion and extension springs store enormous energy, and a spring under tension can injure badly if it’s mishandled. We don’t recommend adjusting or winding springs yourself, and we’d rather you call us than take that risk. Our garage door spring repair team handles that side of the work properly.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Capitol Hill?
A typical new door installation in Capitol Hill runs $700 – $2,200, with the price depending heavily on door size, material and whether the opener is replaced at the same time. A single car door sits at the lower end; a double car door or a custom-fit door for an odd rowhouse opening pushes toward the top. If you’re adding an opener, opener installation typically runs $250 – $550 on its own.
| Service | Typical Estimated Range |
|---|---|
| New door installation (single car) | $700 – $1,400 |
| New door installation (double car) | $1,200 – $2,200 |
| Opener installation | $250 – $550 |
| Panel replacement (if a full door isn’t needed) | $250 – $500 |
What moves the price: door size, steel versus wood, insulation, custom sizing, and whether tracks or the opener need replacing too. The clearest way to avoid overpaying is to get a written estimate that lists the door, the hardware, the opener and the labor as separate lines, so you can see exactly what you’re paying for. Our free estimate includes the on-site measure, a clear quote, and a straight answer on whether a repair would serve you better than a new door. Estimates are free, so call (855) 604-5978.
Garage Door Installation Near Capitol Hill – Our Service Area
We handle garage door installation throughout Capitol Hill and the surrounding neighborhoods, including Navy Yard, Shaw, Anacostia, Brookland, Petworth, Columbia Heights, Adams Morgan and Foggy Bottom. Measuring and quoting are scheduled by appointment, and installation dates are set once your door is ordered. If you’re in a nearby neighborhood, our garage door installation page covers Navy Yard and the garage door installation page covers Shaw.
Serving Capitol Hill, DC – Our Local Coverage Area
We serve Capitol Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Capitol Hill
Garage door installation is the full replacement of your door and its hardware – panels, tracks, springs, rollers and hinges – fitted to your opening as one matched system. It’s different from a repair, which fixes a single failed part on an existing door. When several parts are worn or the door itself is failing, installation is the more durable fix. Call (855) 604-5978 to talk through which one you need.
Most installations are completed in a single visit of a few hours once the door has arrived. The measuring and quote come first, then the door is ordered and scheduled – it isn’t a same-day job like a spring repair. The timeline depends on door size and whether the opener is being replaced at the same time. Call (855) 604-5978 to get your measure on the calendar.
New door installation in Capitol Hill typically runs $700 – $2,200, depending on door size, steel versus wood, and whether an opener is added. A single car door lands at the lower end and a double or custom door toward the top. The written estimate sets the final price, so there are no surprises. Call (855) 604-5978 for a free estimate.
Yes. We work on Raynor doors and LiftMaster openers, along with Chamberlain and Genie equipment. Our technicians are experienced with how each brand is built, so we set a new door and opener up as a matched system. Whichever of those brands you have, we can help. Call (855) 604-5978 to confirm your model.
Yes. We offer emergency garage door service for stuck, broken or unsafe doors, since a compromised door is a security and safety issue today, not tomorrow. Installation itself is scheduled, but if a door fails on you we can book you in for emergency repair or an early morning or Sunday visit. Call (855) 604-5978 and we’ll get you on the schedule.
Warranty coverage depends on the door and opener manufacturer and the specific model you choose, so we walk through it before you order. We’re glad to explain what the manufacturer covers and what our installation workmanship includes. Ask us when we’re out for your free measure. Call (855) 604-5978 with questions.
Clear the garage floor and the area in front of the door so we have room to work, and move anything hanging near the opener track. Make sure your car isn’t blocking the driveway on installation day. If anything brittle or loose is mounted on the door, take it down beforehand. Call (855) 604-5978 if you’re unsure what to move.
Schedule Your Garage Door Installation Service in Capitol Hill Today
Ready to replace a tired garage door with one that fits your opening and works with your opener? We’ll come measure, quote a clear written price, and order a door built to your garage. Our technicians have up to 8 years of experience with Raynor, LiftMaster, Chamberlain and Genie equipment. Call (855) 604-5978 for a free, no-obligation estimate and get scheduled.
Written by the team at Garage Door Repair Capitol Hill.